Service: CE Marking

CE marking for machinery: risk assessment and technical documentation

We support you with the CE marking of your machine, from the risk assessment and technical documentation to the declaration of conformity. This way, you meet the requirements of the Machinery Directive and are prepared for the new EU Machinery Regulation.

CE marking for machinery: risk assessment and technical documentation
Discuss CE marking

When you need support with CE marking

Anyone who places a machine on the EU market must demonstrate that it is safe. Responsibility lies with the manufacturer, even if the machine is built only for in-house use. We support companies in three typical situations.

New machine or plant

You are building a machine or special-purpose machine and need a risk assessment, technical documentation and a declaration of conformity.

Modification or linking

An existing machine is being modified, extended or linked with others to form a plant, and it is unclear whether this is a substantial modification that requires new CE marking.

New Machinery Regulation

From 20 January 2027, the EU Machinery Regulation 2023/1230 applies. Your documentation and processes need to be ready by then.

Service packages: what you can commission from us

The packages follow the path of your machine, from the first question to completed CE marking. You can commission a single package or several together. After the initial meeting you receive a fixed price, with your quote within 24 hours on business days.

1. Machinery Regulation check for modifications

For retrofits, extensions, linking of machines or software changes to existing machinery. We assess under the Machinery Regulation whether your planned change is a substantial modification and give a traceable justification.

Your result: a documented assessment with a clear recommendation for the next steps. The check is credited toward a follow-up order.

2. Risk assessment

For new machinery, modifications, or when your existing assessment is no longer up to date. We identify all hazards across the machine life cycle according to EN ISO 12100, evaluate the risks, define protective measures and determine the required performance level for safety functions.

Your result: a complete, auditable risk assessment as the basis for your CE marking.

3. Safety concept and safety design

When the risk assessment calls for measures. We develop the safety concept and design the safeguards ourselves: guards, interlocks, access points and covers, with safety distances according to EN ISO 13857, ready for production and with drawings. We coordinate the verification of the safety-related control system according to EN ISO 13849 with your electrical engineer or our partner.

Your result: a safer machine instead of mere warning signs, with measures that feed directly into your CE documentation.

4. Complete CE marking

For manufacturers of new machinery and for substantially modified machinery. We clarify the applicable directives, standards and conformity assessment procedure and prepare the technical documentation, including the requirements for the instructions for use. The package builds on the risk assessment and safety concept; on request, we take care of both.

Your result: complete technical documentation and a declaration of conformity or declaration of incorporation ready for signature.

Discuss CE marking

Why KREO

State-certified engineering consultancy

Certified qualification in mechanical engineering, member of the professional association of engineering consultancies.

Design and safety from a single source

We know machines from the design side. This allows hazards to be identified early and eliminated by design instead of being documented afterwards.

One point of contact

From the first conversation to handover, you have one dedicated contact, without detours via sales or a project office.

Remote or on site

With offices in Styria and Vienna, Austria, serving clients in Austria and abroad.

Frequently asked questions about CE marking

When does a modified machine need new CE marking?

When the modification is a substantial modification. The new Machinery Regulation (EU) 2023/1230 sets binding criteria for this for the first time: the key question is whether the modification creates new hazards or increases existing risks so that additional protective measures become necessary. Whoever carries out a substantial modification is legally considered the manufacturer (Article 18) and must prepare a new risk assessment, technical documentation and declaration of conformity. Whether this applies depends on the specific modification. We assess it with you based on the risk assessment.

How much does CE marking cost?

It mainly depends on the size and complexity of the machine, the existing documentation and the number of applicable standards. After the initial meeting, you receive a quote, either as a fixed price or based on time and effort.

Do I need a notified body?

For most machines, no. Only certain high-risk machine categories require the involvement of a notified body. Whether this applies to your machine is clarified in the first step.

What changes with the new Machinery Regulation?

From 20 January 2027, the EU Machinery Regulation 2023/1230 replaces the Machinery Directive. New features include requirements for cybersecurity and AI-based control systems as well as the option of digital operating instructions.

Who is responsible for CE marking?

The manufacturer of the machine, meaning whoever places it on the market or puts it into service for their own use. We prepare the documentation and advise you; you sign the declaration of conformity.

Do you also work for clients outside Austria?

Yes. We serve clients in Austria, Germany, other European countries and the USA, remotely or with on-site meetings.

Insights

Older machine in a production hall being retrofitted with a safety fence, light curtain and new control cabinet

Substantial Modification of a Machine: When a Conversion Triggers New CE Marking

Retrofit, new control system, performance increase or linking: when modifying an existing machine counts as a substantial modification under the Machinery Regulation, who then becomes the manufacturer and where the assessment gets difficult in practice.

Read more →
Robot cell with safety fence and safety door in a production hall

New Machinery Regulation 2027: What Changes for Manufacturers

From January 20, 2027, the Machinery Regulation (EU) 2023/1230 replaces the Machinery Directive. Which changes really affect manufacturers, modifiers and importers, and where existing CE documentation no longer suffices.

Read more →
All articles

Let's talk about CE marking for your machine

Are you building a new machine, planning a modification or preparing for the 2027 Machinery Regulation? Briefly describe your machine. We are your reliable partner for mechanical development: structured, solution-oriented and practical. Send us your inquiry and we will get back to you within 24 hours on working days to arrange a free initial meeting.

Thank you! Your message has been successfully sent.

We will get back to you as soon as possible.
Horst Krieger
Your contact
Horst Krieger
Owner, mechanical engineer

“Your inquiry comes straight to me. I will get back to you within 24 hours on business days.”

KREO Engineering – Horst Krieger

Office Styria:
Eichberg 166
8453 Sankt Johann i.S.

Office Vienna:
Franz-Haas-Platz 6/1/36
1110 Vienna

Web: www.kreo.at
Email: horst@kreo.at

Opening hours:
Mon–Fri: 8 am – 5 pm